Call Display Service; Using Call Display Service; Talking Call Display; Missed Calls - Panasonic KX-TG7842C Operating Instructions Manual

Call Display Service

Using Call Display service

Important:
R This unit is Call Display compatible. To use
Call Display features, you must subscribe
to a Call Display service. Contact your
service provider/telephone company for
details.
Call Display features
Handset / Base unit
When an outside call is being received, the
caller information is displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
R If the unit cannot receive caller information,
the following is displayed:
– "Unavailable"
*2
: The caller dials from
Name & No."
an area which does not provide a Call
Display service.
– "Private caller"
The caller requests not to send caller
information.
– "Long distance"
*2 : The caller makes a long
dist."
distance call.
R If the unit is connected to a PBX system,
caller information may not be properly
received. Contact your PBX supplier.
*1 Handset
*2 Base unit

Missed calls

Handset / Base unit
If a call is not answered, the unit treats it as a
missed call. The display shows "Missed
call".
Note:
R Even when there are unviewed missed
calls, "Missed call" disappears from the
standby display if the following operation is
performed by one of the units:
– A handset is replaced on the base unit
or charger.
50
TG78xxC(en)_1221_ver013.pdf
*1
/ "Unavailable
*1 *2
/ "Private" :
*1 / "Long
50
– Pressing MOFFN on a handset.
– Pressing MEXITN on the base unit.
Phonebook name display
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the
phonebook is displayed and logged in the
caller list.

Talking Call Display

Handset / Base unit
This feature lets you know who is calling
without looking at the display.
To use this feature, you must:
– subscribe to a Call Display service of your
service provider/telephone company.
– turn this feature on (page 41, 44).
When caller information is received, the
handsets and base unit announce the caller's
name or phone number received from your
service provider/telephone company following
every ring.
R Name pronunciation may vary. This feature
may not pronounce all names correctly.
R Call Display service has a limit of how
many characters can be displayed. If the
caller's name is too long, the unit may not
be able to display or announce the entire
name.
R The announcement is heard at the same
level as the ringer volume (page 23, 30, 40,
44).
R If you turn on the answering system and set
the number of rings "2 rings" (page
64), the unit does not announce the caller
information from the landline. If "Toll
saver" is selected and there is a new
message, the unit does not announce the
caller information from the landline.
R When you receive a call while on the
phone, the 2nd caller's name is not
announced even if you subscribe to both
Call Display and Visual Call Waiting
services.
Phonebook name announcement
When caller information is received and it
matches a phone number stored in the
2012/12/21 11:21:31