Panasonic KX-TG7842C Operating Instructions Manual page 44

Programming
Main menu: "Initial setting"
Sub-menu 1
Ringer setting
Talking CID
(Talking Call Display)
*1
Call block
Contrast
(Display contrast)
Change language
(Display)
Main menu: "Cust. Support"
Operation
Displaying customer support Web address.
*1 If you program these settings using one of the units, you do not need to program the same
item using another unit.
*2 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3 When the cellular line only mode is turned on, these menus are not displayed (page 20).
*4 After the Bluetooth device is paired, the device name is displayed.
*5 For CELL 1
*6 For CELL 2
*7 If you select one of the melody ringer tones, it will continue to play for several seconds even
if the caller has already hung up. You may either hear a dial tone or no one on the line when
you answer the call.
*8 The preset melodies in this product are used with permission of © 2009 Copyrights Vision
Inc.
*9 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select "Caller ID auto". To turn this feature off, select
"Manual". (Call Display subscribers only)
To use this feature, set the date and time first (page 17).
44
TG78xxC(en)_1221_ver013.pdf
Sub-menu 2
Ringer volume
*1, *11
Interrupt tone
Night mode
– On/Off
Night mode
– Start/End
–
–
*1
First ring
*1, *2
Block w/o num
(Block calls without phone
number)
–
–
44
Settings Code
Off–6 <1> #160
<On> #201
Off
On <Off> #238
<11:00 PM/ #237
06:00 AM>
On <Off> #162
– #217
<On> #173
Off
On <Off> #240
Level 1–6 <3> #145
<English> #110
Français
Code
#680
2012/12/21 11:21:31
30
31
46
46
50
46
48
47
–
17
–