Unloading At The End Of A Cycle; Forget To Add A Dish - Baumatic SUPREMA1W Instruction Manual

BAUMATIC SUPREMA1W/SS dishwasher user manual
WHAT YOU WILL SEE ON THE DISPLAY:
Digital sign: Shows the delayed time, remaining time and fault codes.
Delay sign: Shows this sign when delaying.
Washing sign: Displays this sign when washing.
Running sign: Display shows this when your machine is running a cycle.
Doesn't flicker when stopping.
Temperature sign: Shows the wash temperature at any time.

FORGET TO ADD A DISH?

A FORGOTTEN DISH CAN BE ADDED AT ANY TIME BEFORE THE DETERGENT
DISPENSER OPENS.
OPEN THE DOOR A LITTLE TO STOP THE WASHING.
•
AFTER THE SPRAY ARMS STOP WORKING, YOU CAN OPEN THE DOOR
•
COMPLETELY.
ADD FORGOTTEN DISHES.
•
CLOSE THE DOOR, THE DISHWASHER WILL WORK AFTER TEN
•
SECONDS.
Need to Change the Cycle?
1. PRESS THE POWER SWITCH TO STOP WASHING
2. PRESS THE 'PROG.' BUTTON TO SELECT THE NEW PROGRAM
3. PRESS THE POWER SWITCH AGAIN TO START WASHING
Note
* – You may have to start a new cycle by reloading the detergent
if it has been a long time since the old cycle began. See page 12 to see
how to do this.
At the End of the Wash Cycle
At end of washing, the time display will flash for 8 seconds while the ALARM
sounds. The ALARM will not sound at the end of delayed washing, however
We recommend you leave about ½ hour before unloading to
avoid injury and brittleness in dishware from heat.
14
14