Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Baumatic BDI631
Summary of Contents for Baumatic BDI631
- Page 1 BDI631 60 cm Fully integrated full height dishwasher...
- Page 2 USER MANUAL FOR YOUR BAUMATIC BDI631 60 cm Fully integrated full height dishwasher NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference;...
-
Page 3: Table Of Contents
Contents Environmental note Important safety information 5 – 7 Specifications 8 - 9 Description of the appliance 9 - 10 Using your dishwasher 10 - 22 Before first use Filling with dishwasher salt 11 – 12 Setting the water softener level Filling with rinse aid Setting the rinse aid level 13 - 14... -
Page 4: Environmental Note
This should be undertaken by a competent person. Disable the door lock to make sure that children cannot get stuck inside the appliance. o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the... -
Page 5: Important Safety Information
General Safety o Repairs to your appliance must only be carried out by a Baumatic engineer or one of its authorised service agents. Any attempt by an inexperienced person to repair the appliance, could result in injury or damage to your dishwasher. - Page 6 This appliance is only designed to wash normal domestic washloads. If you use your dishwasher in any other way or it is incorrectly used, then Baumatic accepts no liability for any damage that might be caused and any guarantee will be void.
- Page 7 Child Safety o Your dishwasher should only be used by adults. You should not allow children in the area of the machine unsupervised. You should not let them touch the controls or play with the appliance. o It could be possible for a child or pet to gain access to the dishwasher if the door is left open.
-
Page 8: Specifications
Specifications Product dimensions Height: 820 - 850 mm Width: 595 mm Depth: 540 mm Aperture dimensions Height: 820 mm (min) Width: 600 mm Depth: 570 mm (min) Product specifications o 12 Place settings o 5 functions: Normal Intensive Economy Rinse Rapid o 3 Wash temperatures: 40°C, 50°C, 65°C o 3 Rinse temperatures: 45°C, 65°C, 70°C... -
Page 9: Description Of The Appliance
Optional extra o DWD600SS- Stainless steel door with mark resistant coating Description of the appliance Upper basket Spray arms Lower basket Water softener Main filter Detergent dispenser Cup shelf Cutlery basket Coarse filter Rinse aid dispenser Drain pipe connector Inlet pipe connector... -
Page 10: Using Your Dishwasher
Control panel ON/OFF button ON/OFF indicator neon Rinse aid and salt indicator neons Program indicator neons Program selection button Using your dishwasher Before first use o Install the appliance as per the installation instructions contained within this booklet. o Fill the water softener with 1 litre of tap water and then fill with specialist dishwasher salt. -
Page 11: Filling With Dishwasher Salt
Filling with dishwasher salt IMPORTANT: You should only use salt that is specially designed for use in a dishwasher. If any other type of salt is used in the appliance (in particular table salt), it will damage the water softener. o Ideally you should fill the water softener with salt, just before you are about to run a wash program. -
Page 12: Setting The Water Softener Level
o IMPORTANT: You do not need to pour 1 litre of water into the container when you subsequently fill the water softener with salt. Setting the water softener level It is possible to regulate the amount of salt that the water softener will release during a wash cycle. -
Page 13: Filling With Rinse Aid
Filling with rinse aid The rinse aid is released during the final rinse and it helps to prevent water from forming droplets on your dishes. These droplets will lead to spots and streaks being left on items after the wash program has completed. o Your dishwasher is designed to utilise liquid rinse aid. -
Page 14: Filling With Dishwasher Detergent
o You should continue to adjust the rinse aid level upwards until you get no water spots. o If you get cloudiness or streaking on your dishes, the rinse aid level is set too high and it is causing foaming during the wash cycle. -
Page 15: Loading The Upper Basket
Loading the upper basket The upper basket is most suited to washing delicate and light dishware, such as glasses, coffee & tea cups, saucers, plates, bowls and shallow pans (that are not heavily soiled). Cups Small serving bowl Large serving bowl Glasses Saucers Dish... - Page 16 Lower position o If the upper wheels are placed in the guide supports, then the basket is in the lower position. o For accommodating additional tumblers, cups and mugs. You can also place small, espresso sized cups on top of the side racks. You should take care to ensure that there is enough clearance between the top of the cups placed on top of the side racks and the underneath of the dishwasher interior.
-
Page 17: Loading The Lower Basket
IMPORTANT: Care should be taken to make sure that the spray arms can move freely when items have been loaded into the baskets. Loading the lower basket The lower basket is most suited to washing larger and more heavily soiled items, such as saucepans, saucepan lids and serving dishes. You can also load bowls and a variety of plates into the lower basket. -
Page 18: The Cutlery Basket
The cutlery basket Cutlery should be placed inside of the cutlery basket. The cutlery basket should then be placed in the appropriate position in the lower basket. Forks Soup spoons Dessert spoons Teaspoons Knives Serving spoon Gravy ladle Serving fork o For best washing... -
Page 19: The Cutlery Basket
o Do not allow glasses to touch inside the dishwasher, otherwise damage may occur. o Small objects can be placed inside of the cutlery basket. The following items are NOT suitable for washing inside a dishwasher:- o Cutlery with a handle of mother-of-pearl, wood, horn or china. o Plastic items that are not resistant to heat. -
Page 20: Program Table
Program table Program Cycle Program Description Detergent Program information of cycle pre/main times* Normal For normally Pre-rinse 4 grams soiled loads, such Wash (50°C) (pre-rinse) minutes as pots, plates, Rinse 20 grams glasses and Rinse (65°C) (main wash) lightly soiled Drying pans, standard daily c ycle. -
Page 21: Changing A Wash Program
o Turn the appliance on by using the ON/OFF button. o IMPORTANT: Wait for 5 seconds before pressing the program selection button, otherwise the appliance may not function correctly. o Press the program selection button to choose an appropriate wash program for the load that you are washing. The relevant program indicator neon will light to show which program you have selected. -
Page 22: Rinse Aid And Salt Indicator Neons
Rinse aid and salt indicator neons o The rinse aid and salt indicator neons on the control panel will let you know when the appliance needs rinse aid or salt adding to it. o The neon indicates that you need to add rinse aid to the appliance. -
Page 23: Cleaning The Filters
IMPORTANT: Whilst the filtering system is efficient, your dishwasher is not a waste disposal unit. All items being washed inside of the dishwasher should have food scraps removed from them before being loaded into the appliance. Cleaning the filters For best performance and results, the entire filter assembly should be thoroughly cleaned regularly (ideally after each wash cycle). -
Page 24: Cleaning The Spray Arms
Cleaning the spray arms The spray arms should be cleaned regularly, to prevent hard water deposits from clogging the spray arm jets and bearings. o To remove the spray arm, unscrew the nut and take out the washer that sits on top of the spray arm. o Gently pull upwards to remove the spray arm. -
Page 25: Cleaning The Door
Cleaning the door o To clean the edge around the outside of the door, you should use a soft, damp cloth only. o To prevent water from penetrating the door lock or electrical components, DO NOT use a spray cleaner of any kind. o DO NOT use any abrasive cleaner or scouring pads on the inner or outer surfaces, as they may cause damage to them. - Page 26 This includes situations where appliances have been tiled in, sealed in with sealant, have wooden obstructions placed in front of the appliance, like plinths. Or any installation other than the one specified by Baumatic Ltd. has been completed.
-
Page 27: General Troubleshooting
Please refer to the conditions of guarantee that appear on the warranty card that receive with appliance. IMPORTANT: Baumatic Ltd. operates a policy of continuous improvement and reserves the right to adjust and modify its products without prior notification. General troubleshooting PROBLEM POSSIBLE WHAT TO DO... - Page 28 Stained tub Detergent with Use a detergent without colourant. interior colourant was used Dishes are not Rinse aid dispenser is Make sure that the rinse aid fully dried empty dispenser is filled with rinse aid. Dishes and Improper program Select a more intense wash program. pans are not clean Improper loading...
-
Page 29: Installation
Installation IMPORTANT: THIS INSTALLATION MUST COMPLETED BY A SUITABLY QUALIFIED PERSON. BAUMATIC ONLY SANCTION INSTALLATION GIVEN THIS INSTRUCTION MANUAL. SHOULD DISPOSE PACKAGING ENVIRONMENTALLY FRIENDLY MANNER. Aperture requirements o The aperture that your dishwasher needs to be installed into should resemble the one shown in the above drawings. -
Page 30: Preparing And Connecting The Furniture Door
nstallation stages 1. Preparing and connecting the furniture door. 2. Adjusting the tension of the door spring. 3. Connecting to the mains water supply . Connecting to the water outlet 5. Connecting to the power supply 6. Applying the condensation strip 7. - Page 31 o Attach upper hooks onto furniture door. o Attach lower hooks onto furniture door. o Lift the furniture door towards the dishwasher door, ensuring that the upper and lower hooks locate into the slots on the outside of the dishwasher door. o Push the furniture door downwards so it locks into place on the dishwasher door.
-
Page 32: Adjusting The Tension Of The Door Spring
Adjusting the tension of the door spring o The door of the dishwasher is attached to springs. These are set at the factory to ensure that they are at the proper tension, so that the door open close smoothly. o After the furniture door has been fitted, you will need to adjust the tension of the door spring. -
Page 33: Connecting To The Mains Water Supply
onnecting to the mains water supply IMPORTANT: Do not connect the appliance to your mains water supply using an old or an existing water inlet hose. The inlet hose supplied with the dishwasher is the ONLY one that should be used. DO NOT CONNECT THE WATER INLET HOSE TO A HOT WATER TAP. -
Page 34: Connecting To The Water Outlet
onnecting to the water outlet Secure the drain hose, so that it cannot move whilst the dishwasher is in use. Place the end of the drain hose on your drain pi pe. Push it a short way down into your drain pipe. IMPORTANT: Do not insert the drain hose too deeply into the pipe, as this may cause siphoning. -
Page 35: Applying The Condensation Strip
Consult the rating plate, located on the right hand side of the drop down door BEFORE making the electrical connections. Ensure that the voltage reaching the plug is the same as that on the rating plate. REMOVE RATING PLATE INFORMATION ON IT IS IMPORTANT. The moulded plug that is supplied with the appliance must be placed into an earthed and insulated socket. -
Page 36: Positioning The Dishwasher
o The condensation strip will be located inside of your dishwasher. o Ensure that the underneath of the worktop is clean before sticking the strip to it. o Separate the backing paper away from the strip. o Stick the condensation strip to the underneath of the worktop. o IMPORTANT: Failure to attach the condensation strip could result in damage to your worktop. -
Page 37: Levelling The Appliance
Levelling the appliance o IMPORTANT: Your dishwasher must be level for it to operate properly. o Make sure that the dishwasher is supported whilst it is being levelled, otherwise it may tip over. o The rear feet can be adjusted by using the adjusting screw at the front of the appliance. -
Page 38: Securing The Dishwasher
Securing the dishwasher The dishwasher must be secured to the worktop, this can be done in one of two ways:- Standard worktop- Secure dishwasher underside of the worktop by using two wood screws. You should screw through the ho les in the brackets at the top of the dishwasher cabinet. -
Page 39: Contact Details
U ited Kingdom Czech Republic Baumat ic Ltd., Baumatic CR spol s.r.o. Baumat ic Buildings, Ampe rova 495 Bennet Road, 46215, Librec Readin g, Berkshire Czech Republic G2 0QX United Kingdom +420 800 185 263 Sales Telephone w.baumatic.cz 118) 933 6900...