Unloading At The End Of A Cycle; Forget To Add A Dish - Baumatic BDW01 Instruction Manual

WHAT YOU WILL SEE ON THE DISPLAY:
A FORGOTTEN DISH CAN BE ADDED AT ANY TIME BEFORE THE DETERGENT DISPENSER OPENS.
OPEN THE DOOR A LITTLE TO STOP THE WASHING.
•
AFTER THE SPRAY ARMS STOP WORKING, YOU CAN OPEN THE DOOR COMPLETELY.
•
ADD FORGOTTEN DISHES.
•
CLOSE THE DOOR, THE DISHWASHER WILL WORK AFTER TEN SECONDS.
•
At end of washing, the time display will flash for 8 seconds while the ALARM
however. CAUTION – HOT interior. Leave about ½ hour before unloading.
BAUMATIC BDW01 dishwasher user manual

FORGET TO ADD A DISH?

Need to Change the Cycle?
1. PRESS THE POWER SWITCH TO STOP WASHING
2. PRESS THE 'PROG.' BUTTON TO SELECT THE NEW PROGRAM
3. PRESS THE POWER SWITCH AGAIN TO START WASHING
* Note – You may have to start a new cycle by reloading the detergent if it has
been a long time since the old cycle began. See page 12 to see how to do this.
At the End of the Wash Cycle
sounds. The ALARM will not sound at the end of delayed washing,
SHOWS THE SELECTED WASHING
PROGRAM (From Left): INTENSIVE, NORMAL,
ECONOMY, RINSE, GLASS, RAPID, PRE-RINSE.
INFORMATION DISPLAY:
INFORMATION DISPLAYED HERE:
WASHING PROGRAM, ERROR,
DOOR-OPEN, ETC.
WASHING PHASE: (From left)
Pre-rinse; Main wash;
Rinse; Drying. They will
run and alternate during washing.
STATE INFORMATION: (From top)
1.Time remaining in a washing
program. 2.Delay time involved.
3.The temperature.
DIGITAL DISPLAY: Shows the remaining time,
error codes and the delay time.
CHOICE OF TEMPERATURE: YOU CAN CHOOSE
A WASH FROM FOUR AVAILABLE TEMPERATURES.
THE INTENSITY OF WASHING WILL BE CHANGED.
14
14