Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Baumatic BDI631
Summary of Contents for Baumatic BDI631
- Page 1 BDI631 60 cm Fully integrated full height dishwasher...
- Page 2 USER MANUAL FOR YOUR BAUMATIC BDI631 60 cm Fully integrated full height dishwasher NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference;...
-
Page 3: Table Of Contents
Connecting to the mains water supply Connecting to the water outlet Connecting to the power supply 33 - 34 Applying the condensation strip 34 - 35 Positioning the dishwasher Levelling the appliance Securing the dishwasher Before first use Baumatic consumables Technical data Contact details... -
Page 4: Environmental Note
This should be undertaken by a competent person. Disable the door lock to make sure that children cannot get stuck inside the appliance. o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the... -
Page 5: Important Safety Information
General Safety o Repairs to your appliance must only be carried out by a Baumatic engineer or one of its authorised service agents. Any attempt by an inexperienced person to repair the appliance, could result in injury or damage to your dishwasher. - Page 6 This appliance is only designed to wash normal domestic washloads. If you use your dishwasher in any other way or it is incorrectly used, then Baumatic accepts no liability for any damage that might be caused and any guarantee will be void.
- Page 7 Child Safety o Your dishwasher should only be used by adults. You should not allow children in the area of the machine unsupervised. You should not let them touch the controls or play with the appliance. o It could be possible for a child or pet to gain access to the dishwasher if the door is left open.
-
Page 8: Specifications
Specifications Product dimensions Height: 820 - 850 mm Width: 595 mm Depth: 540 mm Aperture dimensions Height: 820 mm (min) Width: 600 mm Depth: 580 mm (min) Product specifications o 12 Place settings o 5 Functions: Normal Intensive Economy Rinse Rapid o 5 Temperatures: 40°C, 50°C, 55°C, 60°C, 65°C o LED display... -
Page 9: Description Of The Appliance
Electrical details Rated voltage: 230 Vac 50 Hz Supply connection: 13 A (double pole switched fused outlet with 3 mm contact gap) Optional extra o DWD600SS- Stainless steel door with mark resistant coating Power consumptions Off mode: 0.00 W Left on mode: 0.40 W Description of the appliance Upper basket Cup shelf... -
Page 10: Control Panel
Control panel ON/OFF button ON/OFF indicator neon Rinse aid and salt indicator neons Program indicator neons Program selection button Using your dishwasher Before first use o Install the appliance as per the installation instructions contained within this booklet. o Fill the water softener with 1 litre of tap water and then fill with specialist dishwasher salt. - Page 11 o Open the door of the dishwasher and then remove the lower basket. The basket should be empty when you remove it. o Turn water softener anticlockwise and remove it. o Pour 1 litre of water into the water softener. IMPORTANT: It is only necessary to do this when you fill the container with salt for the first time.
-
Page 12: Setting The Water Softener Level
Setting the water softener level It is possible to regulate the amount of salt that the water softener will release during a wash cycle. The water softener should be set to a level that is appropriate for the hardness of your water (please refer to the table below). -
Page 13: Filling With Rinse Aid
Filling with rinse aid The rinse aid is released during the final rinse and it helps to prevent water from forming droplets on your dishes. These droplets will lead to spots and streaks being left on items after the wash program has completed. o Your dishwasher is designed to utilise liquid rinse aid. -
Page 14: Filling With Dishwasher Detergent
o You should continue to adjust the rinse aid level upwards until you get no water spots. o If you get cloudiness or streaking on your dishes, the rinse aid level is set too high and it is causing foaming during the wash cycle. -
Page 15: Loading The Upper Basket
Loading the upper basket The upper basket is most suited to washing delicate and light dishware, such as glasses, coffee & tea cups, saucers, plates, bowls and shallow pans (that are not heavily soiled). Cups Small serving bowl Large serving bowl Glasses Saucers Dish... -
Page 16: Loading The Lower Basket
Loading the lower basket The lower basket is most suited to washing larger and more heavily soiled items, such as saucepans, saucepan lids and serving dishes. You can also load bowls and a variety of plates into the lower basket. Dessert dishes Serving plate Dinner plates... -
Page 17: The Cutlery Basket
The cutlery basket Cutlery should be placed inside of the cutlery basket. The cutlery basket should then be placed in the appropriate position in the lower basket. Forks Soup spoons Dessert spoons Teaspoons Knives Serving spoon Gravy ladle Serving fork o For best washing... -
Page 18: The Cutlery Basket
o Do not allow glasses to touch inside the dishwasher, otherwise damage may occur. o Small objects can be placed inside of the cutlery basket. The following items are NOT suitable for washing inside a dishwasher:- o Cutlery with a handle of mother-of-pearl, wood, horn or china. o Plastic items that are not resistant to heat. -
Page 19: Program Table
Program table o The ECONOMY program is suitable for cleaning a typical load of dirty dishes and is the most efficient in terms of its combined energy and water consumption. Program Cycle Program Description Detergent Program Energy Water information of cycle pre/main times* (kWh) -
Page 20: Setting A Wash Program
Setting a wash program Make sure that the before first use section has been followed. o Check whether the appliance needs rinse aid or salt adding to it. o Pull out the top and bottom baskets, then load them in accordance with the loading instructions. -
Page 21: At The End Of A Wash Program
o Close the door firmly, so that you hear the door lock click shut. o After a few seconds, you will hear the appliance begin to fill with water and the wash program will have started. At the end of a wash program o The time display will flash for 8 seconds and a buzzer will sound. -
Page 22: Cleaning The Filters
Main filter- Food and soil particles are trapped by this filter and pulverised by a special jet on the lower spray arm. This debris is then washed down the drain. Coarse filter- Larger items such as pieces of bone or glass, which could clog the drain, are trapped in this filter. -
Page 23: Cleaning The Spray Arms
5. Place the main and coarse filter back into their original positions in the base of the dishwasher. You must turn the coarse filter clockwise to lock it back into position. IMPORTANT: If a glass gets smashed inside of the appliance, you must check there is no glass in the filter before the machine is used again as this can cause a drainage failure. -
Page 24: Cleaning The Control Panel
Cleaning the control panel IMPORTANT: Do not use any abrasive cleaner or household polish on either the control panel or operating parts. o Wipe over the control panel using a brand new damp cloth with warm water. Cleaning the door o To clean the edge around the outside of the door, you should use a soft, damp cloth only. - Page 25 IMPORTANT: If any other combinations of the program indicator neons flash, you should not attempt to clear it yourself contact Baumatic Customer Care Department. IF THE FAULT CODE REAPPEARS AFTER FOLLOWING THE ABOVE ADVICE AND CLEARING THE FAULT CODE.
-
Page 26: General Troubleshooting
Or any installation other than the one specified by Baumatic Ltd. has been completed. Please refer to the conditions of guarantee that appear on the... - Page 27 is set on a wash program once a week. Otherwise the seal around the motor may dry out and cause noise. Suds in the Improper detergent Ensure if you are using 3 in 1 detergent tablets, in conjunction with rinse aid and salt that the levels are set correctly.
-
Page 28: Installation
Installation IMPORTANT: THIS INSTALLATION MUST COMPLETED BY A SUITABLY QUALIFIED PERSON. BAUMATIC ONLY SANCTION INSTALLATION GIVEN THIS INSTRUCTION MANUAL. SHOULD DISPOSE PACKAGING ENVIRONMENTALLY FRIENDLY MANNER. Aperture requirements o The aperture that your dishwasher needs to be installed into should resemble the one shown in the above drawings. -
Page 29: Preparing And Connecting The Furniture Door
Installation stages 1. Preparing and connecting the furniture door. 2. Adjusting the tension of the door spring. 3. Connecting to the mains water supply 4. Connecting to the water outlet 5. Connecting to the power supply 6. Applying the condensation strip 7. - Page 30 o Attach the upper hooks onto the furniture door. o Attach the lower hooks onto the furniture door. o Lift the furniture door towards the dishwasher door, ensuring that the upper and lower hooks locate into the slots on the outside of the dishwasher door.
-
Page 31: Adjusting The Tension Of The Door Spring
Adjusting the tension of the door spring o The door of the dishwasher is attached to springs. These are set at the factory to ensure that they are at the proper tension, so that the door open close smoothly. o After the furniture door has been fitted, you will need to adjust the tension of the door spring. -
Page 32: Connecting To The Mains Water Supply
Connecting to the mains water supply IMPORTANT: Do not connect the appliance to your mains water supply using an old or an existing water inlet hose. The inlet hose supplied with the dishwasher is the ONLY one that should be used. DO NOT CONNECT THE WATER INLET HOSE TO A HOT WATER TAP. -
Page 33: Connecting To The Water Outlet
Connecting to the water outlet Secure the drain hose, so that it cannot move whilst the dishwasher is in use. Place the end of the drain hose on your drain pipe. Push it a short way down into your drain pipe. IMPORTANT: Do not insert the drain hose too deeply into the pipe, as this may cause siphoning. -
Page 34: Applying The Condensation Strip
Consult the rating plate, located on the right hand side of the drop down door BEFORE making the electrical connections. Ensure that the voltage reaching the plug is the same as that on the rating plate. REMOVE RATING PLATE INFORMATION ON IT IS IMPORTANT. The moulded plug that is supplied with the appliance must be placed into an earthed and insulated socket. -
Page 35: Positioning The Dishwasher
o The condensation strip will be located inside of your dishwasher. o Ensure that the underneath of the worktop is clean before sticking the strip to it. o Separate the backing paper away from the strip. o Stick the condensation strip to the underneath of the worktop. o IMPORTANT: Failure to attach the condensation strip could result in damage to your worktop. -
Page 36: Levelling The Appliance
Levelling the appliance o IMPORTANT: Your dishwasher must be level for it to operate properly. o Make sure that the dishwasher is supported whilst it is being levelled, otherwise it may tip over. o The rear feet can be adjusted by using the adjusting screw at the front of the appliance. -
Page 37: Securing The Dishwasher
Securing the dishwasher The dishwasher must be secured to the worktop, this can be done in one of two ways:- o Standard worktop- Secure dishwasher underside of the worktop by using two wood screws. o You should screw through the holes in the brackets at the top of the dishwasher cabinet. -
Page 38: Baumatic Consumables
BC005 Stainless Steel Cleaner and Protector (250 ml) o BC007 E-Cloth – General Purpose Cloth o BC008 Microwave Cover To order a Baumatic consumable product please call 0 123 5437 244 and quote the product code. You can also order online from... -
Page 39: Technical Data
Technical Data Manufacturer BAUMATIC LTD Model Number BDI631 Standard Place Settings Energy Efficiency Class (1) Annual Energy Consumption (2) 291 kWh Energy Consumption of the Standard 1.02 kWh Cleaning Cycle Power Consumption of Off Mode 0.0 W Power Consumption of Left-On Mode 0.4 W... -
Page 40: Contact Details
United Kingdom Czech Republic Baumatic Ltd., Baumatic CR s.r.o. Baumatic Buildings, Lípová 665 6 Bennet Road, 460 01 Liberec 4 Reading, Berkshire Czech Republic RG2 0QX United Kingdom +420 483 577 200 www.baumatic.cz S ales Telephone (0118) 933 6900 Slovakia S ales Fax Baumatic Slovakia, s.r.o.