Operation Of Connected Camera - JVC RM-HP250DE Instructions Manual

General

Operation of Connected Camera

When RM-HP250 is connected to a camera, all features that are available on RM-HP250 can only be
controlled by RM-HP250, and control of these features using the camera is disabled.
Switches on the camera that are disabled, as well as disabled menu items are as follows.
Standard connection of RM-HP250 (Connection of 2 units)
GAIN
SHUTTER(1
WHT.BAL
FULL AUTO(2
User 1, 2 and 3 with the following features assigned
BARS
B.STRETCH1-5
B.COMPRESS1-5
AE LEVEL +
AE LEVEL –
NOTE NOTE
(1 SHUTTER will also be disabled if the setting is "VARIABLE" or below "1/30" (When Frame rate is 60/24) or "1/25" (When
Frame rate is 50).
(2 Setting is configured from RM-HP250 regardless of the status of the FULL AUTO switch.
Menu items that are disabled
Menu Page
CAMERA OPERATION
CAMERA PROCESS [1/2]
CAMERA PROCESS [2/2]
ADVANCED PROCESS
WHITE BALANCE
GENLOCK
NOTE NOTE
(3 CINEMA is forcibly set to "OFF". To adjust MATRIX, make ues of the menu on the camera.
(4 GAMMA is fixed at the menu setting value of the camera before connecting to the remote control. However, when the menu
setting value is OFF, GAMMA will be forcibly set to STANDARD.
30
Function
AE LEVEL
SMOOTH TRANS
BARS
MASTER BACK
DETAIL
V/H BALANCE
H. FREQUENCY
SKIN DETECT
BLACK
KNEE
LEVEL
DNR
CINEMA
GAMMA
LEVEL
WHITE PAINT R
WHITE PAINT B
SD H PHASE
HD H PHASE
SC COARSE
SC FINE
Menu Display on
GY-HD250/GY-HD251
REMOTE
REMOTE
REMOTE
REMOTE
REMOTE
REMOTE
REMOTE
REMOTE
REMOTE
REMOTE
REMOTE
REMOTE
[OFF](3
[STANDARD](4
[CINEMA](4
[FILMOUT](4
REMOTE
REMOTE
REMOTE
REMOTE
REMOTE
REMOTE
REMOTE