Before Using The Terminal - Fujitsu F-02F Instruction Manual

Before using the terminal

This terminal supports LTE, W-CDMA, GSM/GPRS, Wireless
LAN System.
Because your terminal uses wireless transmission, it may
not function in locations where it is difficult for radio waves
to penetrate, such as tunnels, underground passages and
some buildings, in areas where radio waves are weak, or out
of Xi and FOMA service area. Even when you are high up in
a tall building or condominium and nothing blocks your
view outside, your terminal may not be able to receive or
transmit signals. Also, communication may be interrupted
even when there are strong radio waves with 4-signal status
icon on the terminal and you are not moving (traveling).
Maintain a separate record of the data you saved in the
terminal. Note that DOCOMO assumes no responsibility for
any loss of saved contents of data resulting from
malfunction, repair, changing of the model or other
handling of the terminal.
In the terminal, as it is for a PC, some applications that you
install may give instability of the operation, or may send
your location information or personal information
registered to the terminal to outside via the Internet and the
information may be used improperly. Please thoroughly
check a provider and operation status of the application etc.
which you want to use beforehand and then use it.
You are recommended to save important data to microSD
card or a PC.
This terminal supports FOMA Plus-Area and FOMA HIGH-
SPEED Area.
The terminal does not support i-mode sites (programs) or
i- ppli.
You can use the terminal only with docomo mini UIM card.
If you have a UIM or FOMA card, bring it to a docomo Shop
to replace.
Battery is built into the terminal. You cannot replace by
yourself.
The terminal does not support voice call and digital
communication (videophone, 64K data communication).
Even in Manner mode, screen capturing sound, capturing
sound for Capture & Draw, shutter sound, count down
sound for self timer while the camera is activated, and Find
Me Ringtone sound for Bluetooth Low Energy Settings are
emitted.
You can check your own phone number in the following
step.
From the Home screen,
[My profile]
The terminal automatically performs communication for
some functions, for example, to synchronize data, check the
latest software or maintain connection with the server. If you
transmit a large amount of data such as downloading
applications or watching video, a packet communication
charge becomes high. Subscription of packet flat-rate
service is highly recommended.
Depending on the applications or service you use, packet
communication charge may be applied even in Wi-Fi
communication.
5
[Settings] [About tablet]
Contents/Precautions