Fujitsu F-02F Instruction Manual page 34

Charging with AC adapter
To charge with an optional AC Adapter 04, operate as follows.
a Open the jack cap on the terminal P23
b Insert the microUSB plug of the AC adapter into the
external connection jack of the terminal horizontally with
B-engraved side facing up
c Insert the AC adapter's power plug into an outlet
Indicator LED lights in red while charging, and turns off
when charging is complete.
d When charging is complete, remove the AC adapter's
power plug from the outlet
e Remove the microUSB plug from the terminal and then
close the jack cap of the terminal P23
Jack cap
microUSB
plug
Charging with a PC
You can charge the terminal with a PC using an optional PC
connection USB cable T01 or Micro USB Cable 01.
When a screen of new hardware detection or operation
selection appears on the PC, select [
32
Indicator LED
External connection jack
To AC 100V
outlet
Power plug
AC adapter
Before using the terminal
(Cancel)].