Fujitsu F-02F Instruction Manual page 177

Bluetooth Version
Output
Supported
Bluetooth
profile
*10
Earphone/microphone
jack
Display language
Input language
(Character entry)
Input language (Voice
input)
*1
Continuous stand-by time indicates the estimated stand-by time
when radio signal reception is normal. Stationary continuous stand-
by time indicates the estimated average operation time when radio
signal reception is normal.
Due to internal battery charging condition, function settings,
operating environment such as ambient temperature, radio wave
conditions in the area of use (the radio waves are weak or absent),
etc. stand-by time may be reduced to about half.
*2
Activating applications also reduces stand-by time even if you do
not connect to the Internet.
*3 Continuous 1Seg watching time indicates the estimated watching
time when radio signal reception is normal.
*4 Continuous Full Seg watching time indicates the estimated
watching time when radio signal reception is normal.
*5 Continuous Mobacas watching time indicates the estimated
watching time when radio signal reception is normal.
*9
4.0
Power class 1
HSP, DUN, OPP, SPP, HID, A2DP,
AVRCP, PBAP, HDP, ANP, FMP,
PASP, PXP, TIP
3.5 mm Audio jack, tetrapolar
Japanese/English
Japanese/English/Korean/Chinese
Subjected to Google voice search
function
*6 Charging time indicates the estimated time for charging an empty
internal battery with the terminal turned OFF. Charging with the
terminal turned ON or charging in lower temperature requires
longer time.
*7
2.4 GHz/5 GHz are supported for IEEE 802.11n.
*8 Compatible with IEEE802.11ac draft version. The terminal may
not be able to communicate with official-version-compatible
devices launched in future or draft-version-compatible devices
from other companies. For compatible products, refer to the
following website.
http://www.fmworld.net/product/phone/wifi/ (in Japanese only)
*9
It is confirmed that the terminal and all Bluetooth devices are
compliant with Bluetooth standards designated by Bluetooth SIG,
and they are authenticated. However, procedures may differ or data
transfer may not be possible depending on the device's
characteristics or specifications.
*10 These are created by standardizing connection procedures for
Bluetooth communications according to individual product
properties.
Internal battery
Battery used
Nominal voltage
Nominal capacity
175
Li-ion polymer battery
3.8V
9,600 mAh (36.5 Wh)
Appendix/Index