Updating software immediately
Software update starts immediately.
There are 2 ways to activate software update: activating
from Software update notice screen and activating from the
menu.
<Example> Activating software update from the setting
menu
1
From the Home screen,
tablet] [Software Update] [Start the
software update] [Yes]
If software update is not needed, [No update is needed.]
is displayed.
Activating from Software update notice screen :
Software update notice screen [Start the software
update]
[Settings] [About
Display
170
2
Rewriting starts automatically approximately
10 seconds after [Ready for update. Please
refrain from starting other application.] is
displayed
Rewriting starts when you tap [OK].
While updating the software, all key operations become
disabled and updating cannot be canceled.
When the software update is complete, the terminal
restarts automatically and the Home screen is
displayed.
❖
Post-update display
When software update is complete, it is notified by
status bar. Open the Notification panel and tap the notification
to display the update completion screen.
on the
Appendix/Index