Replacement Bulbs - Chevrolet 2013 Silverado Owner's Manual

Chevrolet Silverado Owner Manual - 2013 - crc 1st edition - 4/5/12
3. Turn the bulb socket (C) one
quarter turn to release the bulb
socket from the lamp
housing (A).
4. Pull the bulb (B) from the bulb
socket (C).
5. Reverse the steps to install.

Replacement Bulbs

Exterior Lamp
Back-up Lamp
Back-up Lamp*
Cargo Lamp and
Center
High-Mounted
Stoplamp
(CHMSL)
Fender Marker
Lamp (If Equipped)
Front Turn Signal
Lamp and
Parking Lamp
Exterior Lamp
High-Beam
Headlamp
Low-Beam
Headlamp
License
Plate Lamp
Stoplamp/Taillamp/
Bulb
Turn Signal Lamp
Number
Stoplamp/Turn
3047K
Signal Lamp/
1156
Taillamp*
* Chassis Cab Models
912LL
For replacement bulbs not listed
here, contact your dealer.
W5WLL
3157A
Black plate (39,1)
Vehicle Care
Electrical System
Bulb
Number
Electrical System
9005
Overload
The vehicle has fuses and circuit
H11
breakers to protect against an
electrical system overload.
168
When the current electrical load is
too heavy, the circuit breaker opens
3047K
and closes, protecting the circuit
until the current load returns to
normal or the problem is fixed. This
1157
greatly reduces the chance of circuit
overload and fire caused by
electrical problems.
Fuses and circuit breakers protect
power devices in the vehicle.
Replace a bad fuse with a new one
of the identical size and rating.
If there is a problem on the road and
a fuse needs to be replaced, the
same amperage fuse can be
borrowed. Choose some feature of
the vehicle that is not needed to use
and replace it as soon as possible.
10-39