Models); Taillamps, Turn Signal; Stoplamps, And Back-Up; Lamps - Chevrolet 2013 Silverado Owner's Manual

Chevrolet Silverado Owner Manual - 2013 - crc 1st edition - 4/5/12
Taillamps (Chassis Cab

Models)

A. Backup Lamp
B. Stoplamp/Taillamp/Turn
Signal Lamp
To replace one of these bulbs:
1. Remove the four screws.
2. Lift the lens off the lamp
assembly.
3. Turn the old bulb
counterclockwise and pull it
straight out from the socket.
4. Install a new bulb into the
socket, turn it clockwise, and
press it in until it is tight.
5. Reinstall the lens and the four
screws.

Taillamps, Turn Signal,

Stoplamps, and Back-Up

Lamps

A. Stoplamp/Taillamp/Turn
Signal Lamp
B. Back-up Lamp
Black plate (37,1)
Vehicle Care
To replace one of these bulbs:
1. Open the tailgate. See Tailgate
on page 2 9 for more
information.
2. Remove the two rear lamp
assembly screws near the
tailgate latch strikerpost and pull
rearward until disengaging the
two outer pins on the taillamp
assembly from the vehicle.
3. Turn the bulb socket
counterclockwise to remove it
from the taillamp assembly.
10-37