Chevrolet 2013 Silverado Owner's Manual page 256

Chevrolet Silverado Owner Manual - 2013 - crc 1st edition - 4/5/12
7-54 Infotainment System
Using the Re-dial Command
1. Press and hold /
two seconds.
2. After the tone, say Re-dial.
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
Press / to answer the call.
Press / to ignore a call.
Call Waiting
Call waiting must be supported on
the cell phone and enabled by the
wireless service carrier.
Press / to answer an
incoming call when another call
is active. The original call is
placed on hold.
Press /
the original call.
for
To ignore the incoming call, no
action is required.
Press
current call and switch to the call
on hold.
Three-Way Calling
Three-way calling must be
supported on the cell phone and
enabled by the wireless service
carrier.
1. While on a call, press
2. Say Three-way call.
3. Use the dial or call command to
dial the number of the third party
to be called.
4. Once the call is connected,
press /
together.
Ending a Call
Press /
again to return to
Muting a Call
During a call, all sounds from inside
the vehicle can be muted so that the
person on the other end of the call
cannot hear them.
/ to disconnect the
Transferring a Call
Audio can be transferred between
the Bluetooth system and the cell
/ .
phone.
The cell phone must be paired and
connected with the Bluetooth
system before a call can be
transferred. The connection process
can take up to two minutes after the
ignition is turned to ON/RUN.
to link all callers
Transferring Audio from the
Bluetooth System to a Cell Phone
During a call with the audio in the
vehicle:
to end a call.
Black plate (54,1)
To mute a call, press /
then say Mute call.
To cancel mute, press /
and then say Un-mute call.
, and
,