Pick-Up Box Identification; And Fender Marker; Lamps; Models) - Chevrolet silverado 2012 Owner's Manual

Pick-Up Box Identification

and Fender Marker

Lamps

The pick-up box identification lamps
are LEDs. For replacement of the
LED lighting assembly contact your
dealer.
To replace a pickup box fender
marker lamp bulb:
1. Press the tab from the back to
remove the lamp.
2. Turn the bulb socket
counterclockwise to remove from
the lamp assembly.
3. Gently pry the bulb from the
socket.
4. Install the new bulb in socket.
5. Reinstall socket into lamp
assembly.
6. Reinstall the lamp assembly.
Taillamps (Chassis Cab

Models)

A. Backup Lamp
B. Stoplamp/Taillamp/Turn
Signal Lamp
Vehicle Care
To replace one of these bulbs:
1. Remove the four screws.
2. Lift the lens off the lamp
assembly.
3. Turn the old bulb
counterclockwise and pull the it
straight out from the socket.
4. Install a new bulb into the
socket, turn it clockwise, and
press it in until it is tight.
5. Reinstall the lens and the
four screws.
10-45