Wds Mode - D-Link DAP-2553 User Manual

Section 3 - Configuration
In WDS mode, the DAP-2553 wirelessly connects
multiple networks, without functioning as a wireless
AP.
Wireless Band: Select either 2.4 GHz or 5 GHz from the pull-down
menu.
Mode:
WDS is selected from the pull-down menu.
Network Name
Service Set Identifier (SSID) is the name
(SSID):
designated for a specific wireless local area
network (WLAN). The SSID's factory default
setting is dlink. The SSID can be easily changed
to connect to an existing wireless network or to
establish a new wireless network.
SSID Visibility:
Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Auto Channel
Enabling this feature automatically selects
Selection: the channel that will provide the best wireless
performance. This feature is not supported in

WDS mode.

Channel:
All devices on the network must share the same
channel. To change the channel, use the pull-down
menu to make the desired selection.
Channel Width:
Use the pull-down menu to choose 20 MHz or Auto 20/40 MHz.
Remote AP MAC
Enter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple networks.
Address:
D-Link DAP-553 User Manual
WDS mode
0