Multi-Ssid - D-Link DAP-2553 User Manual

Section 3 - Configuration
The device supports up to eight multiple Service Set
Identifiers. You can set the Primary SSID in the Basic
> Wireless section. The SSID's factory default setting
is dlink. The SSID can be easily changed to connect
to an existing wireless network or to establish a new
wireless network.
Enable
Check to enable support for multiple SSIDs.

Multi-SSID:

Band:
This read-only value is the current band
setting.
Index:
You can select up to seven multi-SSIDs. With
the Primary SSID, you have a total of eight
multi-SSIDs.
SSID: Service Set Identifier (SSID) is the name
designated for a specific wireless local area
network (WLAN). The SSID's factory default
setting is dlink.
to connect to an existing wireless network or to
establish a new wireless network.
SSID Visibility:
Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID across the network, thus making it visible to
all network users.
Security: The Multi-SSID security can be Open System, WPA-Personal, or WPA-Enterprise. For a detailed description of the
Open System parameters please go to page 23. For a detailed description of the WPA-Personal parameters please go
to page 24. For a detailed description of the WPA-Enterprise parameters please go to page 25.
D-Link DAP-553 User Manual
The SSID can be easily changed
Multi-SSID