Home > Basic Settings; Wireless; Access Point Mode - D-Link DAP-2553 User Manual

Section 3 - Configuration
Wireless Band:
Select either 2.4 GHz or 5 GHz from the
pull-down menu.
Mode: Select Access Point from the pull-down menu.
The other three choices are WDS with AP,
WDS, and Wireless Client.
Network Name
Service Set Identifier (SSID) is the name
(SSID):
designated for a specific wireless local area
network (WLAN). The SSID's factory default
setting is dlink. The SSID can be easily changed
to connect to an existing wireless network or to
establish a new wireless network. The SSID can
be up to 32 characters and is case-sensitive.
Enable or Disable SSID visibility. Enabling this
SSID Visibility:
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Enabling this feature automatically selects
Auto Channel
the channel that provides the best wireless
Selection:
performance. Enable is set by default. The
channel selection process only occurs when the
AP is booting up.
Channel: All devices on the network must share the same channel. To change the channel, first toggle the Auto Channel Selection
setting to Disable, and then use the pull-down menu to make the desired selection.
Note: The wireless adapters will automatically scan and match the wireless settings.
D-Link DAP-553 User Manual
Home > Basic Settings

Wireless

Access Point mode

1