Static Pool Setting - D-Link DAP-2553 User Manual

Section 3 - Configuration
The DHCP address pool defines the range of IP
addresses that can be assigned to stations on the
network. A static pool allows specific wireless stations
to receive a fixed IP without time control.
Function Enable/
Dynamic Host Configuration Protocol (DHCP)
Disable:
assigns IP addresses to wireless devices on
the network. This protocol simplifies network
management and allows new wireless devices
to receive IP addresses automatically without
the need to manually assign IP addresses.
Select Enable to allow the DAP-2553 to function
as a DHCP server.
Assigned IP:
Use the Static Pool Settings to assign the same
IP address to a device every time you start up.
The IP addresses assigned in the Static Pool
list must NOT be in the same IP range as the
Dynamic Pool. After you have assigned a static
IP address to a device via its MAC address, click
Apply; the device will appear in the Assigned
Static Pool at the bottom of the screen. You can
edit or delete the device in this list.
Assigned MAC Enter the MAC address of the device requesting association here.
Address:
Subnet Mask:
Define the submask of the IP address specified in the "IP Assigned From" field.
D-Link DAP-553 User Manual

Static Pool Setting

1