Fishman SoloAmp User Manual page 8

Front Panel Controls (cont.)
11. 10dB Pad – If you have a high output pickup and the Clip LED comes
on at low Gain settings, push this switch in for a more usable range.
12. XLR Mic Input – You may also connect an outboard preamp with
balanced XLR out to this input.
13. 1/4" Instrument Input – Accepts all types of passive or active acoustic
pickups.
Note: If you attempt to plug in both the XLR and 1/4-inch inputs at the
same time, the XLR shuts off.
14. Aux In – Use this to control the level of a device plugged into the Aux
Input. Note that the Aux channel is independent of the Mute switch, so
you can play pre-recorded music on your breaks.
15. Monitor – Use this to control the level of the device you plug into the
Monitor Input. See page 16 on Monitor input applications.
16. Reverb (Select) – Press the Reverb button to select among four preset
reverb effects.
17. Phantom Power – Provides 48V to the XLR input for use with a
condenser Microphone. The Phantom LED will light to indicate 48V is
being supplied to the XLR jack.
For more information on Phantom Power, see page 17.
8