Fishman SoloAmp User Manual page 12

Rear Panel Controls (cont.)
25. Aux Input – Plug in a line level stereo audio source such as a CD or MP3
player in this input. The 1/4 inch stereo (TRS) Aux Input mixes the signals
to mono when amplifi ed.
26. Monitor In & Out – The monitor feature on the SoloAmp allows two
performers, each with a SoloAmp, to "cross-feed" their EQ'd and mixed
outputs to each other. This allows each player to turn up the other player's
mix and only hear it also in their SoloAmp. It essentially acts as a monitor,
allowing the performer to hear the other player more easily.
The Monitor In may also be used as another audio input, just like the Aux
Input. The Monitor Out can serve a secondary function as another line
level mix output. This output is always ground isolated to prevent ground
loop hum.
27. Mix D.I. (Post) – Plug in here when you wish to send signals from both
Channels and Aux Input to a mixing console. This post-EQ output is always
ground isolated to prevent ground loop hum.
28. Mute Foot Switch – Plug a mono, on/off (latching type) foot switch
into this jack for remote access to the Mute. The Mute Footswitch
duplicates and overrides the front panel Mute switch.
29. AC Power Input – Connect the SoloAmp to the AC mains supply here.
12