Table of Contents
Advertisement
1-16
C
1: G
HAPTER
Installation
Siting the AccessBuilder 500
When siting the AccessBuilder 500, ensure:
It is accessible and cables can be easily connected.
It is out of direct sunlight and away from sources of heat.
Cabling is away from:
Sources of electrical noise, such as radios, transmitters and
broadband amplifiers.
Power lines and fluorescent lighting fixtures.
Water or moisture cannot enter the case of the unit.
Air flow around the unit and the side of the case is not restricted. We
recommend that you provide a minimum of 30mm (approx. 1.25 inch)
clearance around the unit.
To prolong the operational life of your equipment, do not place objects
on top of the unit.
S
ETTING
TARTED
Advertisement
Table of Contents
