1-18
C
1: G
HAPTER
Connecting to Your 10BaseT LAN
Figure 1-6 Connecting to the 10BaseT Port
You can use the 10BaseT connection on the AccessBuilder 500 in the
following ways
To connect directly to an Ethernet hub port.
To connect to a 10BaseT in-house LAN socket that connects to your
organization's network.
To connect to a single workstation using a 10BaseT crossover cable.
Connecting to an Ethernet Hub
To connect directly to a hub:
1 Connect the UTP cable (not supplied) to the 10BaseT port of the
AccessBuilder 500.
2 Connect the other end to a 10BaseT port on your hub.
S
ETTING
TARTED