Table of Contents
Advertisement
Approvals
B-3
Approvals
This product ostensibly complies with the electro-magnetic
compatibility (EMC) requirements of EN 55022 Class A and EN 50082
(susceptibility). However, to fully comply with Class B of EN55022 the
following prerequisites should be observed:
The WAN port must be attached to a screened digital cable.
The ISDN cable must be used in conjunction with a three turn ferrite.
The product carries the CE certification mark to indicate conformance
with the following EU directives:
LVD (Low Voltage Directive (Safety) 73/23/EEC.
EMC (Electro Magnetic Compatibility) Directive 89/336/EEC.
TTE (Telecommunication Terminal Equipment) Directive 91/263/EEC.
The product conforms to I-CTR3 (based on NET3 – ISDN interface).
See also the FCC and CSA statements at the back of this guide.
Advertisement
Table of Contents
