Connecting To An Ip Host On The Same Ip Network - 3Com AccessBuilder 500 User Manual

Quick Configuration 1-31

Connecting to an IP Host on the Same IP Network

To connect to an IP host on the same network using FastConnect, enter
at the command prompt on the Quick Configuration screen to
IPB
display the screen illustrated in Figure 1-17.
Figure 1-17 Connecting To An IP Host On The Same Network
Complete the fields on this screen as follows:
Remote ISDN Number Type the ISDN number of the remote unit that
connects to the IP network.
Call Type Set the Call Type required for your ISDN line. Toggle this field
to the Call Type required by your ISDN service provider.
Remote IP Address Type the IP address of the remote IP host to which
you want to connect.
Press [CTRL]+[E] to submit this information.
An entry is made in the autocall table so that if any data is destined to
the remote host, a call is made automatically and a connection made
to the remote IP network.