Connecting To An Ip Host On A Different Ip Network - 3Com AccessBuilder 500 User Manual

Quick Configuration 1-33

Connecting to an IP Host on a Different IP Network

To connect to an IP host on a different network using FastConnect,
enter at the command prompt on the Quick Configuration screen
IPR
to display the screen illustrated in Figure 1-18.
Figure 1-18 Connecting To An IP Host On A Different Network
Complete the fields on this screen as follows:
Remote ISDN Number Type the ISDN number of the remote unit that
connects to the remote IP network.
Call Type Set the Call Type required for your ISDN line. Toggle this field
to the Call Type required by your ISDN service provider.
IP Address of this unit's LAN Type the IP address of this unit. This is
the address you entered on the Name screen.
IP Mask of this unit's LAN Type the IP subnet mask you entered for
this unit on the Name screen. See Appendix A for more information
about subnet masks.
IP Address of this end of the ISDN link By default this field is set to
UNNUMBERED which allows unnumbered links to be used. This option
is suitable for most network configurations.