Contents
Creating a Stereo Pair (HEOS 3 Only)
Two HEOS 3 speakers that have been grouped together in the Rooms tab
can be paired together to create a stereo speaker pair where one speaker
only outputs the left channel of audio and the other speaker outputs only
the right channel of audio.
1
Select "Audio".
2
Select "Left" if you want this speaker to play the left
channel of audio or select "Right" if you want this
speaker to play the right channel of audio.
3
Select the Back button and your settings are
automatically saved.
For information about grouping Rooms, please see "Grouping Rooms" (v p. 23).
Setup
Use
Troubleshooting
Removing a Stereo Pair (HEOS 3 Only)
If you have two HEOS 3 speakers that have been grouped and paired
together to output individual left and right channels of audio, you can
ungroup them in the Rooms tab then tell each speaker to output both left
and right channels of audio.
1
Select "Audio".
2
Select "Left+Right".
3
Select the Back button and your settings are
automatically saved.
For information about ungrouping Rooms, please see "Ungrouping
Rooms" (v p. 24).
Adjusting the Status Light Brightness
1
Select "Status Light".
2
Adjust the brightness up or down or set the slider to
the OFF position to completely disable the status light.
32
Status LED
Appendix