Dubbing Still Images Recorded On A Tape To A Memory Card - JVC GR-DVP7 Instructions Manual

Dubbing Still Images Recorded On
A Tape To A Memory Card
Still images can be dubbed from a tape to a memory
card.
VIDEO/MEMORY Switch
Play/Pause Button
Power Switch
SNAPSHOT
Button Lock Button
MENU Button
SET/SELECT
Button
1
Load a cassette. (
2
Load a memory card. (
3
Set the VIDEO/MEMORY Switch to "VIDEO".
4
Set the Power Switch to "P" while pressing
down the Lock Button located on the switch.
5
Set " COPY"
to "IMAGE".
( pg. 38, 50)
6
Press 4/9 to start
playback.
7
At the point you want
to dub, press 4/9
again to engage Still
Playback.
(4/9)
+, – Button
pg. 16)
pg. 17)
COPY – OF F
IMA GE
NAVIGATION
8
To dub the image,
press SNAPSHOT.
The " " indication
blinks during
dubbing.
The selected image
is stored in the
memory card.
NOTES:
If SNAPSHOT is pressed in step 8 when a memory
card is not loaded, the message "COPYING
FAILED" is displayed.
If an image recorded on the tape using "WIDE
MODE" ( pg. 46) is dubbed to a memory card,
the WIDE mode identifying signal is not dubbed
with it.
To use Playback Special effects with a video image
you wish to dub, perform up to step 8 using the
remote control (provided). (
Images are dubbed in 640 x 480 pixels.
65
EN
SP SP
pg. 69)