Initialising A Memory Card - JVC GR-DVP7 Instructions Manual

36
EN

Initialising A Memory Card

You can initialise a memory card anytime.
After initialising, all files and data stored in the
memory card, including those which have been
protected, are cleared.
VIDEO/MEMORY Switch
SET/SELECT Button
1
Set the VIDEO/MEMORY Switch to "MEMORY".
2
Set the Power Switch to "P" while pressing
down the Lock Button located on the switch.
3
Open the LCD monitor fully, or pull out the
viewfinder fully.
4
Press MENU. The
Menu Screen appears.
5
Press + or – to select
"FORMAT", and press
SET/SELECT. The
FORMAT screen
appears.
Power Switch
Lock Button
MENU Button
+, – Button
MENU
PROTECT
DELETE
DPOF
NO . RESET
FORMAT
D I SPLAY
END
F ORMAT
ERASE AL L
EX I ST I NG DATA?
EXECUTE
RETURN
D.S.C. PLAYBACK (cont.)
6
Press + or – to select "EXECUTE", and press SET/
SELECT. The memory card is initialised.
When initialisation is finished, "NO IMAGES
STORED", "NO E-MAIL CLIP STORED" or
"NO SOUND FILES" appears.
To cancel initialisation, select "RETURN".
CAUTION:
Do not perform any other operation (such as
turning off the camcorder) during initialisation.
Also, be sure to use the provided AC Power
Adapter/Charger, as the memory card may be
corrupted if the battery becomes exhausted during
initialisation. If the memory card becomes
corrupted initialise it.