Blank Search - JVC GR-DVP7 Instructions Manual

Digital video camera
Hide thumbs Also See for GR-DVP7:
Table of Contents

Advertisement

Blank Search

Helps you find where you should start recording in
the middle of a tape to avoid time code interruption.
(
pg. 21)
FOCUS/BLANK Switch
Stop Button (8)
1
Load a cassette. (
2
Set the VIDEO/MEMORY Switch to "VIDEO".
3
Set the Power Switch to "P" while pressing
down the Lock Button located on the switch.
4
During Stop mode,
press FOCUS/BLANK.
The "BLANK
SEARCH"
indication appears
blinking and the
camcorder
automatically starts
reverse or forward search, then stops at the
spot which is about 3 seconds of tape before
the beginning of the detected blank portion.
5
To cancel Blank Search midway, press 8.
VIDEO/MEMORY Switch
Power Switch
Lock Button
pg. 16)
BLANK SEARCH
NOTES:
Before starting Blank Search, if the current position
is at a blank portion, the camcorder searches in
the reverse direction. If the current position is at a
recorded portion, the camcorder searches in the
forward direction.
Blank Search does not work if "HEAD CLEANING
REQUIRED. USE CLEANING CASSETTE" has
appeared with the tape.
If the beginning or end of the tape is reached
during Blank Search, the camcorder stops
automatically.
A blank portion which is shorter than 5 seconds of
tape may not be detected.
The detected blank portion may be located
between recorded scenes. Before you start
recording, make sure there is no recorded scene
after the blank portion.
Slow-Motion Playback
Frame-By-Frame Playback
Playback Zoom
Playback Special Effects
Available only with the remote control (provided).
(
pg. 68, 69)
5
23
EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents