Navigation Function - JVC GR-DVP7 Instructions Manual

58
EN

NAVIGATION Function

The Navigation Function helps you check tape
contents by making thumbnail images on a memory
card.
VIDEO/MEMORY Switch
SNAPSHOT Button
NAVI Button
To make thumbnail images during tape
recording
1
Load a cassette. (
2
Load a memory card. (
3
Set the VIDEO/MEMORY switch to "VIDEO".
4
Set the Power Switch to "A" or "M" while
pressing down the Lock Button located on the
switch.
5
Set "NAVIGATION" to the desired navigation
storing time. ( pg. 38, 47)
The " " appears blinking on the screen.
Wait until it stops blinking. If it does not stop
blinking after a while, check if a memory card
is loaded.
6
Press the Recording
Start/Stop Button to
start tape recording.
The image of the point
where recording is
started is captured.
If the Recording
Start/Stop button is
pressed before
" " stops
blinking, the image
Power Switch
Lock Button
MENU
Button
pg. 16)
pg. 17)
L L P P 1 1
Displayed while the
captured image is being
stored in the memory
FEATURES FOR RECORDING (cont.)
of the point where the loaded memory card is
recognised is captured.
If the recording time is over the navigation time
set in step 5, "
captured image is stored in the memory card as
a thumbnail image.
7
Press the Recording Start/Stop Button to stop tape
recording.
NOTES:
The remaining number of storable thumbnail
images also appears on the screen when it reaches
10 or less. If "REC SELECT"is set to "
in DSC Menu, the number shows how many
640 x 480 pixel images can be stored.
If "5S" is set to "5S" or "Anim." in MANUAL
menu, the NAVIGATION function will not work
properly.
To find scenes on tape using thumbnail images
(NAVIGATION Search)
1
Load a cassette. (
2
Load a memory card. (
3
Set the VIDEO/MEMORY switch to "VIDEO".
4
Set the Power Switch to "P" while pressing
down the Lock Button located on the switch.
5
Press NAVI during video playback or stop mode.
The loaded cassette's
NAVIGATION
thumbnail image
screen appears.
Turn the SHUTTLE
SEARCH Ring to the
left (3) to display
the previous page.
Turn the SHUTTLE SEARCH Ring to the right
(5) to display the next page.
6
Press + or – to select the desired image, and press
SET/SELECT.
The "NAVIGATION SEARCH" indication
appears blinking and the camcorder starts
searching the tape for the relevant point of the
selected thumbnail image.
To cancel NAVIGATION search midway...
Press 4/9 or 8, or turn the SHUTTLE SEARCH Ring
0 0 0 0 min min min
to the left (3) or to the right (5).
PAUSE PAUSE PAUSE
CAUTION:
Do not remove the memory card or perform any
other operation (such as turning off the camcorder)
during deletion. Also, be sure to use the provided
AC Power Adapter/Charger, as the memory card may
be corrupted if the battery becomes exhausted
during deletion. If the memory card becomes
corrupted, initialise it.
card.
" appears briefly and the
/
pg. 16)
pg. 17)
NAV I GA I T ON
DATE : 2 . 4 2 5 ' 0 2
TC : 1 3 : 2 3 : 1 5
1 2 3
4 5 006
"
3 : 3 : 2 9