32
Editing cable
(optional 3.5 ø
mini-plug cable)
GR-AX310 only
Downloaded from:
https://www.usersmanualguide.com/
Power switch
EDIT
PLAY/PAUSE
To EDIT
To AUDIO out
To VIDEO out
Audio and Video
cable (optional)
To Remote
To AUDIO IN
PAUSE
To VIDEO IN
VCR (Recording deck)
Tape Dubbing
CONNECT EQUIPMENT
1
Following the illustration at left, connect the
camcorder and the VCR. GR-AX310 only: If you
have a Remote PAUSE terminal, use the editing
cable to connect it to the camcorder and the VCR.
(See "NOTES" below for details.)
PREPARE FOR DUBBING
2
Set the camcorder's power switch to PLAY, turn on
the VCR's power, and insert the appropriate
cassettes in the camcorder and the VCR.
SELECT VCR MODE
3
Engage the VCR's AUX and Record-Pause modes.
FIND EDIT-IN POINT
4
Engage the camcorder's Play mode to find a spot
just before the edit-in point. Once it's reached, press
PAUSE on the camcorder.
START EDITING
5
Press PLAY on the camcorder and engage the VCR's
Record mode.
STOP EDITING TEMPORARILY
6
Engage the VCR's Record-Pause mode and press
PAUSE on the camcorder.
EDIT MORE SEGMENTS
7
Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.
NOTES (GR-AX310 only):
● When using a Remote PAUSE terminal, pressing EDIT on the
camcorder in step 5 automatically engages the VCR's Record
mode.
● When using a Remote PAUSE terminal, you can access a
function called Master Edit Control System. Before beginning,
reset the camcorder's counter to "0:00:00" at an edit-out point.
When the tape reaches this point (remember there's a small
margin of error) during editing, the camcorder and VCR pause
automatically. However, some VCRs are not compatible with
the Master Edit Control System.
Random Assemble Editing [R.A.Edit]
(GR-AX310 only)
Create edited videos easily using your camcorder as the
source player. You can select up to 8 "cuts" for automatic
editing, in any order you like. R.A.Edit is more easily
performed when the optional RM-V700U MBR (Multi-
Brand Remote) is set to operate with your brand of VCR
(see chart at left), but can also be performed by operating
the VCR manually.
CONTINUED ON NEXT PAGE
EDITING