Extending The Drying Level For The "Automatic Plus" Programme - Miele T 8823 C Operating Instructions Manual

Programmable functions
Extending the drying level for
the "Automatic plus"
programme
The electronics of this dryer ensure a
very effective and energy-efficient
drying process.
You can, however, extend the range
of the drying level in this programme.
Follow steps (A,B,C ...) to
programme and store in memory.
Before you begin, first ensure that:
– The dryer is switched off.
– The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Switch the dryer on.
Wait until the indicator light for the
Start/Stop button lights up constantly. . .
C . . . and then release the Start/Stop
button.
D Press the Low temperature button
four times.
– The Low temperature indicator light
will briefly flash on and off six times.
54
The option selected will be displayed
by a number which will alternate with
P.
0 The drying level will be damper.
I Standard setting
(The Automatic plus indicator light
will also flash once.)
2 The drying level will be drier.
(The Automatic plus indicator light
will also flash twice.)
E Pressing the Start/Stop button
switches from one to the other.
F Switch the dryer off.
The settings have been changed. You
can alter the settings again at any time.
Control
^ Repeat steps A to D.
^ Switch the dryer off after step D.