Altering The Standard Drying Level In The"Automatic Plus" Programme - Miele T 8164 WP Operating Instructions Manual

Altering the standard drying
level in the"Automatic plus"
programme
The drying level for this programme is
set to the standard Normal level. You
have the option of changing the drying
level to Hand iron (damper than Nor‐
mal) or to Normal+ (drier than Normal).
Follow steps (,, ...) to pro‐
gramme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is pointing
to Finish.
 Press Start and keep it pressed in
whilst carrying out steps -.
 Switch the dryer on.
 Wait until the indicator light for the
Start button lights up constantly . . .
 . . . and then release the Start but‐
ton.
 Turn the programme selector to Cot‐
tons Hand iron.
The Empty container indicator light will
flash six times.
Programmable functions
The option selected will be displayed
by a number which will alternate with
.
 Standard setting - Hand iron
 Factory default setting
(The Clean out airways indicator light
will also flash once)
 Standard setting will be Normal+
(The Clean out airways indicator light
will also flash twice)
 Pressing the Start button switches
between the options.
 Switch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
 Carry out steps -.
 Switch the dryer off after checking.
51