Extending The Drying Level Range - Miele T 8823 C Operating Instructions Manual

Programmable functions
Extending the drying level
range
You can extend the range of the
drying levels for many of the
programmes:
Machine iron plus
(drier than Machine iron).
Slightly dry
(drier than Hand iron).
Normal plus
(drier than Normal).
You can use this programming function
only for programmes which allow you to
select the drying levels.
Follow steps (A,B,C ...) to
programme and store in memory.
Before you begin, first ensure that:
– The dryer is switched off.
– The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Switch the dryer on.
Wait until the indicator light for the
Start/Stop button lights up constantly. . .
C . . . and then release the Start/Stop
button.
D Press the Low temperature button
eleven times.
– The indicator light Low temperature
flashes short once and long three
times.
62
The option selected will be displayed
by a number which will alternate with
P.
0 Default setting
i Drying level range extended
(The Automatic plus indicator light
will also flash.)
E Pressing the Start/Stop button
switches from one to the other.
F Switch the dryer off.
The settings have been changed. You
can alter the settings again at any time.
Control
^ Repeat steps A to D.
^ Switch the dryer off after step D.
To select the extended drying level
^ Select a programme.
^ Press the drying level button
repeatedly until one or two indicator
lights come on.
– Indicator lights Extra dry and Normal
= Normal plus
– Indicator lights Hand iron and
Normal = Slightly dry
– Indicator lights Machine iron and
Hand iron = Machine iron plus