Clean Out Airways Indicator - Miele T 8823 C Operating Instructions Manual

Clean out airways indicator

Fluff should be removed after drying.
The Clean out airways indicator will
remind you to Clean the filters when a
certain amount of fluff has collected
in the filters. You can decide at what
level of fluff this reminder should be
given.
You will have an idea of how often this
should be done after a few drying
programmes.
Follow steps (A,B,C ...) to
programme and store in memory.
Before you begin, first ensure that:
– The dryer is switched off.
– The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Switch the dryer on.
Wait until the indicator light for the
Start/Stop button lights up constantly. . .
C . . . and then release the Start/Stop
button.
D Press the Low temperature button
eight times.
– The Low temperature indicator light
will flash on and off slowly once.
Programmable functions
The option selected will be displayed
by a number which will alternate with
P.
0 The Clean out airways indicator
light is deactivated.
I The Clean out airways indicator
light will come on when there is a
heavy build-up of fluff
(The Automatic plus indicator light
will also flash once.)
2 Default setting
(The Automatic plus indicator light
will also flash twice.)
3 The Clean out airways indicator
light will come on when there is
only a light build-up of fluff
(The Automatic plus indicator light
will also flash three times.)
E Pressing the Start/Stop button
switches from one to the other.
F Switch the dryer off.
The settings have been changed. You
can alter the settings again at any time.
Control
^ Repeat steps A to D.
^ Switch the dryer off after step D.
59