Replacing The Light Bulb - Baumatic BLE360SS User Manual

o The evaporating tray and defrost water drain hole should be
cleaned periodically with the defrost drain plug. This will prevent
water from collecting in the bottom of the refrigerator, instead of
flowing down the defrost drainage channel and drain hole.
o You can also pour a small amount of water down the drain hole
to clean inside of it.
o You should be careful to make sure that food packages do not
touch the rear wall of the appliance, as this can interrupt the
automatic defrosting process and deflect water into the base of
your refrigerator.
o If excessive ice deposits form on the back wall of the refrigerator
(larger than 3-5 mm), then you should switch off the appliance
using the thermostat dial. You should leave the appliance off
until the ice deposits have melted.

Replacing the light bulb

WARNING: PLEASE ENSURE THAT YOUR
APPLIANCE IS DISCONNECTED FROM
YOUR MAINS SUPPLY BEFORE
ATTEMPTING TO REPLACE THE LIGHT
BULB.
o Using a screwdriver remove the cover.
o The bulb that you should use is an E14 max, which is the same
as the bulb originally fitted by the factory.
o Please dispose of the bulb correctly.
o The light bulb is not covered by Baumatic's guarantee.
o Replace the light cover and after waiting five minutes, reconnect
your plug to your mains supply.
15