Replacing The Light Bulb - Baumatic BR200.3A Instruction Manual

o The evaporating tray and defrost water drain hole should be
o You can also pour a small amount of water down the drain hole
o You should be careful to make sure that food packages do not

Replacing the light bulb

o Press the hooks on the sides of the light cover and slide the
o Change the present light bulb with a new one. The replacement
o Replace the light cover and after waiting five minutes, reconnect
Get user manuals: See SafeManuals.com
cleaned periodically with the defrost drain plug. This will prevent
water from collecting in the bottom of the refrigerator, instead of
flowing down the defrost drainage channel and drain hole.
to clean inside of it.
touch the rear wall of the appliance, as this can interrupt the
automatic defrosting process and deflect water into the base of
your refrigerator.
WARNING: PLEASE ENSURE THAT YOUR
APPLIANCE IS DISCONNECTED FROM
YOUR MAINS SUPPLY BEFORE
ATTEMPTING TO REPLACE THE LIGHT
BULB.
cover off.
bulb should not have a greater rating than 15 W.
your plug to your mains supply.
14