Table of Contents
Advertisement
Replacing the light bulb
WARNING: PLEASE ENSURE THAT YOUR
APPLIANCE IS DISCONNECTED FROM
YOUR
ATTEMPTING TO REPLACE THE LIGHT
BULB.
o Press the rear end of the bulb cover until the sides release and
then lift the bulb cover clear of the bulb.
o Change the present light bulb with a new one. The replacement
bulb should not have a greater rating than 15 W; (an E14 15 W
bulb should be used).
o Replace the light cover and after waiting five minutes, reconnect
your plug to your mains supply.
Installation
IMPORTANT: Before installation and usage read
all the instructions and make sure that the
voltage (V) and the frequency (Hz) indicated on
the rating plate are exactly the same as the
voltage and frequency in your home. The rating
plate can be found on the front left edge of the
inside of the refrigerator.
The manufacturer declines all responsibility in the event of the installer
failing to observe all the accident prevention regulations in force,
which are necessary for normal use and the regular operation of the
electric system.
MAINS
SUPPLY
BEFORE
16
Advertisement
Table of Contents
