Lexmark 4036-307 Service Manual page 19

Error Sub
Displayed message
code codes
846 .06 Front calibration strip
insufficient dark area
846 .07 Front magnification
exceeds limits
847 .00 Modem Failure
848 .00 Modem/Config ID
Mismatch
848 .01 Modem/Config ID
Mismatch
849 .00 HD/Config ID Mismatch
Description
Front excessive variability for
Mono, Red, Green, or Blue
Rear excessive variability for
Mono, Red, Green, or Blue
The Configuration ID bit that
describes the device's modem
doesn't match the actual modem
installed in the device.
A device doesn't have a modem
installed, even though its
Configuration ID indicates that a
modem should be present.
A device has a modem installed,
but its Configuration ID indicates
that a modem shouldn't be
present.
A device doesn't have a hard
drive installed, even though its
Configuration ID indicates that a
hard drive should be present.
4036-307, -308
Action
See "" on page 4-20.
See "" on page 4-20.
Replace modem card
See "848.00 Modem/config ID
mismatch" on page 4-21.
See "848.01 Modem/config ID
mismatch" on page 4-21.
Replace hard drive
See "849.00 HD/config ID
mismatch" on page 4-21.
Diagnostic information
2-5