Waking Up The System; Pick Up The Remote Control; Even Incoming Calls Wake Up The System; If The System Fails To Respond - TANDBERG MXP Series User Manual

MXP Series Video Endpoints
What's in this guide? Getting started Getting started

Waking up the system

To make a call you need to wake up the system from standby

Pick up the remote control

To wake up the system just pick up the
remote control or press any key. You
may have to point the remote control
towards the system to make it discover
you.
The system will now show the welcome
screen.
Even incoming calls wake up the
system!
The system is in standby mode
whenever it is not used. The screen is
then black. Any incoming call will wake
up the system from standby.
There are some restrictions to this if the
Using Do not disturb function has
been activated.

If the system fails to respond

Should the system fail to respond, make
sure that:
• The system is connected to line voltage
• The remote control has working batter-
ies.
D1479201 MXP Series User Guide, May 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
Making calls Using the phonebook
5
In-call features Videoconferencing

The welcome screen

The name that your
system has been given.
The orange frame
Any calls missing or
shows which icon is
other warnings will
currently selected.
appear here.
User Guide
Contact us
The IP number of
your system is the
dial-in number of
your system.
The main menu.
www.cisco.com