Hauling The Tractor And Snow Blower - Alamo Great White 8650-A Operator's Manual

OPERATION

14 Hauling the Tractor and Snow Blower

Before transporting a loaded tractor and implement,
measure the height and width dimensions and gross
weight of the complete loaded unit. Ensure that the
load will be in compliance with the legal limits set for
the areas that will be traveled through.
Use adequately sized and rated trailers and equipment
to transport the tractor and implement. Consult an
authorized dealer to determine the proper equipment
required. Using adequately sized chains, heavy duty
straps, cables and/or binders, securely tie down both
the front and rear of the tractor utilizing the proper tie
down locations as specified by the tractor manufacturer.
Arrange the chains so that when tightened, the chains
are pulling downward and against themselves. Carefully
tighten the securing chains or other fasteners used as
much as possible using boomers or binders to apply
maximum tension. Use extreme care when attaching
and removing the securing devices as the extreme
tension involved when released has the potential to inflict
serious injury.
While hauling the tractor and implement, make occasional stops to check that the tractor and implement have not
moved or shifted and that the securing chains have maintained tension. If during transport a hard braking, sharp
turning, or swerving action was performed, stop at the next safe location to inspect the security of the load.
8650A 07/05 Operation Section 4-31
© 2005 Alamo Group Inc.