Hydraulic Chute Rotation Cylinder - Alamo Great White 8650-A Operator's Manual

Hydraulic Chute Rotation Cylinder

1. A standard 3 x 8 inch stroke hydraulic cylinder, 20-1/4 closed pin centers, must be fitted to the chute rotation
mechanism. DO NOT install any longer stroke, or non-standard hydraulic cylinders as damage to the chute rotation
mechanism will result.
2. A hydraulic restrictor is required to limit hydraulic flow.
3. Attach PTO Shaft to snow blower. Install key in shaft, slide yoke over shaft and fasten with setscrew (A). Tighten
O
setscrew (B) at 90 to keyway and lock down with jam nut (C).
A
8650A 07/05
© 2005 Alamo Group Inc.
ASSEMBLY
B
NOTE: Lubricate telescoping
members of driveline.
Assembly Section 3-2
C