Alamo Great White 8650-A Operator's Manual page 17

DANGER! All Safety Shields, Guards and other Protective Safety devices should be used and maintained
in good working condition. All safety devices should be inspected carefully at least daily for
missing or broken components. NEVER REMOVE PROTECTIVE SHIELDS AND GUARDS!
NEVER MODIFY OR CUT PROTECTIVE SHIELDS OR GUARDS! When shields or guards are
removed to access areas for maintenance, they must be replaced and be in good condition before
operating. Missing, broken, or worn shields, guards, and other protective devices must be
replaced at once and prior to operation to reduce the possibility of injury or death from thrown
objects, entanglement, or contact.
Alamo Industrial mowers use balanced and matched system components for blade carriers, blades,
cuttershafts, knives, knife hangers, rollers, drivetrain components, and bearings. These parts are made and
tested to Alamo Industrial specifications. Non-genuine "will fit" parts do not consistently meet these
specifications. The use of "will fit" parts may reduce mower performance, void mower warranties, and present
a safety hazard. Use genuine Alamo Industrial mower parts for economy and safety.
Concluding Safety Instructions and Practices
In addition to the design and configuration of this Implement, including Safety Signs and Safety Equipment, hazard
control and accident prevention are dependent upon the awareness, concern, prudence, and proper training of
personnel involved in the operation, transport, maintenance, and storage of the machine. Refer also to Safety
Messages and operation instruction in each of the appropriate sections of the Tractor and Equipment Manuals.
Pay close attention to the Safety Signs affixed to the Tractor and Equipment.
8650A 07/05
© Alamo Group Inc.
2005
SAFETY
(SWS-2)
PARTS INFORMATION
SEE YOUR ALAMO DEALER
Safety Section 1-13
(SPAM-1)
(SG-18)