Operating The Tractor And Snow Blower; (9.1) Foreign Debris Hazards - Alamo Great White 8650-A Operator's Manual

9. Operating the Tractor and Snow Blower

THE OPERATOR
UNDERSTAND HOW TO OPERATE THE TRACTOR
AND SNOW BLOWER AND ALL CONTROLS
BEFORE ATTEMPTING TO OPERATE. The operator
must read and understand the Safety and Operation
Sections of the snow blower and tractor operator's
manuals. These manuals must be read and explained
to any operator who cannot read. Never allow someone
to operate the snow blower and tractor without complete
operating instructions.
Before starting any operation, the operator must become
familiar with the area to be snow blowed and any
obstacles and hazards contained within to ensure safety
to the operator, bystanders, and equipment. Special
attention should be paid to foreign debris, rough terrain,
steep slopes, and passersby and animals in the area.
WARNING! Many varied objects, such as wire, cable, rope, or chains, can become
entangled in the rotating parts of the Implement. These objects could
then swing outside the housing at greater velocities than the auger. Such
a situation is extremely hazardous and could result in serious injury or
even death. Inspect the cutting area for such objects before working in
the area. Remove any such objects from the site. Never allow the auger
to contact such objects.
9.1 Foreign Debris Hazards
Remove all foreign objects and debris. If objects are
too big to remove, mark them clearly and be sure to
prevent the implement from contacting them.
8650A 07/05
© 2005 Alamo Group Inc.
OPERATION
MUST COMPLETELY
(STL-6)
Operation Section 4-20