Operating The Snow Blower - Alamo Great White 8650-A Operator's Manual

WARNING! Blow snow at the speed that you can safely operate and control the Tractor
and Snow Blower. Safe speed depends on terrain and snow conditions.
Normal ground speed range is from 0 to 5 mph. Use slow speeds when
operating on or near steep slopes, ditches, drop-offs, overhead obstructions,
power lines, or when debris and foreign objects are to be avoided.

10 Operating the Snow Blower

Before operating the snow blower recheck that all
fasteners, nuts, bolts, screws and cotter pins are in
place and all bolts are torqued to specification.
WARNING! Only operate the snow blower in conditions were you have clear visibility in
daylight or with adequate artificial lighting. Never snow blow in darkness
or in conditions where you cannot clearly see at least 100 yards in front and
to the sides of the Tractor and Snow Blower. Make sure that you can clearly
see and identify passersby, steep slopes, ditches, drop-offs, overhead
obstructions, power lines, debris and foreign objects. If you are unable to
clearly see these types of items, discontinue snow blowing.
DO NOT operate this Implement on a Tractor that is not properly maintained.
DANGER!
Should a mechanical or Tractor control failure occur while operating,
immediately shut down the Tractor and perform repairs before resuming
operation. Serious injury and possible death could occur from not maintaining
this Implement and Tractor in good operating condition.
WARNING!
Do not snow blow with two machines in the same area except with Cab tractors with the
windows closed.
8650A 07/05
© 2005 Alamo Group Inc.
OPERATION
(SGM-11)
Operation Section 4-22
(SSB-4)
(SSB-1)
(SG-36)