Alamo Great White 8650-A Operator's Manual page 16

WARNING! Periodically inspect all moving parts for wear and replace when
necessary with authorized service parts. Look for loose fasteners,
worn or broken parts, and leaky or loose fittings. Make sure all pins
have cotter pins and washers. Serious injury may occur from not
maintaining this machine in good working order.
Perform service, repairs and lubrication according to the maintenance
WARNING!
section. Ensure the unit is properly lubricated as specified in the
lubrication schedule and all bolts and nuts are properly torqued.
Failure to properly service, repair and maintain this Implement in good
operating condition could cause component failure and possible
serious injury or even death.
Replace bent or broken blade with new blades. NEVER ATTEMPT
DANGER!
TO STRAIGHTEN OR WELD ON BLADES SINCE THIS WILL LIKELY
CRACK OR OTHERWISE DAMAGE THE BLADE WITH SUBSE-
QUENT FAILURE AND POSSIBLE SERIOUS INJURY FROM
THROWN BLADES.
DANGER!
Always disconnect the main PTO Driveline from the Tractor before
performing service on the Snow Blower. Never work on the Snow
Blower with the Tractor PTO driveline connected and running. The
Fan, Auger or Drivelines could turn without warning and cause
immediate entanglement, injury or death.
WARNING! All Safety Shields, Guards and Safety devices including (but not
limited to) - the Chain Shield, Cross Shaft Shield, Gearbox Shields,
and PTO integral shields must be used and maintained in good
working condition. All safety devices should be inspected carefully
at least daily for missing or broken components. Missing, broken,
or worn items must be replaced at once to reduce the possibility of
injury or death from entanglement.
WARNING!
DO NOT weld or repair rotating Blower components. Welds and other
repairs may cause severe vibration and/or component failure resulting
in parts being thrown from the blower causing serious bodily injury.
See your Authorized Dealer for proper repairs.
WARNING!
Ensure the remote starting system is inoperative before servicing or
cleaning the machine. Inadvertent engine start up could result in
entanglement or runover causing serious injuries or death.
WARNING!
Use only OEM specified shear pins as replacements pins. The use of
incorrect shear pins can cause failures in the Snow Blower rotating
components resulting in property damage and/or serious bodily injuries.
(SSB-19)
8650A 07/05
© Alamo Group Inc.
2005
SAFETY
(SG-35)
(SGM-10)
(SSB-8)
(SSB-9)
Safety Section 1-12
(SG-21)
(SSB-14)
(SSB-17)