Sleep Time - Symbol Phaser P460 Reference Manual

Sleep Time

Scan the bar code below to select how long the scanner will "stay awake" (not power down)
in seconds after a trigger pull or a key press. First scan this bar code, then enter a range from
05 to 32, using the numeric bar codes on page 5-90. It can stay awake from 5 seconds to 32
seconds.
Note: Allowing the scanner to stay awake longer than originally
programmed may effect the battery life time for that session before
needing a charge.
SLEEP TIME (RANGE OF 5 TO 32 SECONDS)
Parameter Menus
5-11