Chapter 3. Operation; Introduction; Phaser Default Mcl Application - Symbol Phaser P460 Reference Manual

Chapter 3
Operation

Introduction

This chapter covers how to use the Phaser scanner. There are two ways to enter data into the
scanner - scanning a bar code, or entering the numbers manually using the keypad.

Phaser Default MCL Application

The Phaser is shipped from the factory with a default MCL application installed. This
application demonstrates most of the operations of the Phaser, including uploading,
downloading, scanning and keyboard entry in both batch and POS modes of operation.
Your MCL application may be different than what is described here. See your System
Developer for more information.
When the unit is initially powered up (e.g., when a new battery is inserted), it displays the
system start-up banner. Alternatively, the scanner can be reset manually using the <FN><*>
key combination. The system banner appears as follows:
SYMBOL TECHNOLOGIES
Phaser P460
Figure 3-1. Banner Screen
3-1