Multi-Level Security Arming; Table Of Zones - Viper 500 ESP Installation Manual

Car security
Table of Contents

Advertisement

multi-level security arming

Multi-Level Security Arming is a feature that allows you to select which of the security system's inputs or sensors
will be active and which will be bypassed at the time that the system is armed. (See Table of Zones section in
this guide.) Pressing the arm button (only on a Standard Configuration transmitter) again within five seconds of
arming the security system will activate the Multi-Level Security Arming feature. Each time the arm button is
pressed again, a different security level is selected. The different security levels can be selected as follows:
Pressing
one time: The siren chirps once. The system is armed.
Pressing
a second time within five seconds: The siren chirps twice followed by a long chirp. Zone Two is
now bypassed.
Pressing
a third time within five seconds: The siren chirps three times followed by a long chirp. Zone Four
is now bypassed.
Pressing
a fourth time within five seconds: The siren chirps four times followed by a long chirp. Zones
Two and Four are now bypassed.
Pressing
a fifth time within five seconds: The siren chirps five times followed by a long chirp. All input
zones, except the ignition, are now bypassed.
NOTE: Multi-Level Security Arming only applies to a single arming cycle. Once the system is disarmed
and then re-armed, all the zones will be active again.

table of zones

ZONE NO.
TRIGGER TYPE
1
Instant
2
Multiplexed
3
Two-stage, progresses from
warning to full alarm
4
Multiplexed Input
5
Two-stage (similar to doors)
NOTE: The Warn Away® response does not report on the LED.
© 1999 Directed Electronics, Inc. Vista, CA
INPUT DESCRIPTION
H1/6 BLUE wire. Connect to optional hood/trunk pins.
Blue wire of plug-in shock sensor. Inputs shorter than 0.8
seconds will trigger a Warn Away response, while inputs longer
than 0.8 seconds will instantly trigger full alarm sequence.
Door switch circuit. H1/5 GREEN or H1/7 VIOLET.
GREEN wire of plug-in shock sensor. Inputs shorter than 0.8
seconds will trigger a Warn Away response, while inputs longer
than 0.8 seconds will instantly trigger full alarm sequence.
Ignition input. H1/9 YELLOW.
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents